FINDMC C6256-1000/C6256-1500/C6256-2000/C6256-3000 Precision Manual Lathe Turning Machine Max.Swing Over Bed 560mm 7.5kw
Integral machine bed adopts high strength iron to realize high rigidity and precision.
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance.
Headstock gears hardened and precision ground to achieve high precision and low noise.
Machine Parameters
| Model | C6256/1000 | C6256/1500 | C6256/2000 | C6256/3000 | |||||
| CAPACITY | Max.swing over bed | 560mm | 560mm | 560mm | 560mm | ||||
| Max.swing over cross slide | 355mm | 355mm | 355mm | 355mm | |||||
| Max.swing over gap | 785mm | 785mm | 785mm | 785mm | |||||
| Effective length of gap | 200mm | 200mm | 200mm | 200mm | |||||
| Center Distance | 1000mm | 1500mm | 2000mm | 3000mm | |||||
| Bed Width | 350mm | 350mm | 350mm | 350mm | |||||
| HEADSTOCK | Spindle hole | 80mm | 80mm | 80mm | 80mm | ||||
| Spindle nose | ISO-D8 | ISO-D8 | ISO-D8 | ISO-D8 | |||||
| Spindle taper | MT7(1:20) | MT7(1:20) | MT7(1:20) | MT7(1:20) | |||||
| Spindle speed(Number) | (12steps)25-1600rpm | (12steps)25-1600rpm | (12steps)25-1600rpm | (12steps)25-1600rpm | |||||
| FEEDS AND THREADS | Max.travel of top slide | 130mm | 130mm | 130mm | 130mm | ||||
| Max.travel of cross slide | 316mm | 316mm | 316mm | 316mm | |||||
| Max.size of toolshank | 25*25m2 | 25*25m2 | 25*25m2 | 25*25m2 | |||||
| Longitudinal metric feeds | 35kinds 0.059-1.646mm/rev | 35kinds 0.059-1.646mm/rev | 35kinds 0.059-1.646mm/rev | 35kinds 0.059-1.646mm/rev | |||||
| Longitudinal inch feeds | 35kinds 0.0022-0.0612inch/rev | 35kinds 0.0022-0.0612inch/rev | 35kinds 0.0022-0.0612inch/rev | 35kinds 0.0022-0.0612inch/rev | |||||
| Cross metric feeds | 35kinds 0.020-0.573mm/rev | 35kinds 0.020-0.573mm/rev | 35kinds 0.020-0.573mm/rev | 35kinds 0.020-0.573mm/rev | |||||
| Cross inch feeds | 35kinds 0.00048-0.01354inch/rev | 35kinds 0.00048-0.01354inch/rev | 35kinds 0.00048-0.01354inch/rev | 35kinds 0.00048-0.01354inch/rev | |||||
| Metric threads range | 47kinds 0.2-14mm | 47kinds 0.2-14mm | 47kinds 0.2-14mm | 47kinds 0.2-14mm | |||||
| Inch threads range | 60kinds 2-112T.P.I | 60kinds 2-112T.P.I | 60kinds 2-112T.P.I | 60kinds 2-112T.P.I | |||||
| Moudle threads range | 39kinds 0.1-7M.P | 39kinds 0.1-7M.P | 39kinds 0.1-7M.P | 39kinds 0.1-7M.P | |||||
| Diametral threads range | 50kinds 4-112D.P | 50kinds 4-112D.P | 50kinds 4-112D.P | 50kinds 4-112D.P | |||||
| TAILSTOCK | Dia.of tailstock sleeve | 75mm | 75mm | 75mm | 75mm | ||||
| Taper of tailstock sleeve | MT5 | MT5 | MT5 | MT5 | |||||
| Max.travel of tailstock | 180mm | 180mm | 180mm | 180mm | |||||
| MOTOR | Main drive motor | 7.5KW | 7.5KW | 7.5KW | 7.5KW | ||||
| Coolant pump motor | 90W | 90W | 90W | 90W | |||||
| PACKING | L*W*H(1000mm) | 245*115*180cm | 295*115*180cm | 345*115*180cm | 445*115*180cm | ||||
| WEIGHT | N.W/G.W(1000mm) | 2150/2500kgs | 2250/2600kgs | 2550/2900kgs | 2900/3300kgs | ||||
Configuration Information
