FINDMC C6246-1000/C6246-1500/C6246-2000 Precision Manual Lathe Turning Machine Max.Swing Over Bed 460mm 5.5kw
Integral machine bed adopts high strength iron to realize high rigidity and precision.
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance.
Headstock gears hardened and precision ground to achieve high precision and low noise.
Machine Parameters
| Model | C6246/1000 | C6246/1500 | C6246/2000 | ||||
| CAPACITY | Max.swing over bed | 460mm | 460mm | 460mm | |||
| Max.swing over cross slide | 270mm | 270mm | 270mm | ||||
| Max.swing over gap | 690mm | 690mm | 690mm | ||||
| Effective length of gap | 165mm | 165mm | 165mm | ||||
| Center Distance | 1000mm | 1500mm | 2000mm | ||||
| Bed Width | 300mm | 300mm | 300mm | ||||
| HEADSTOCK | Spindle hole | 58mm | 58mm | 58mm | |||
| Spindle nose | ISO-D6 | ISO-D6 | ISO-D6 | ||||
| Spindle taper | MT6(1:20) | MT6(1:20) | MT6(1:20) | ||||
| Spindle speed(Number) | (12steps)25-2000rpm | (12steps)25-2000rpm | (12steps)25-2000rpm | ||||
| FEEDS AND THREADS | Max.travel of top slide | 128mm | 128mm | 128mm | |||
| Max.travel of cross slide | 285mm | 285mm | 285mm | ||||
| Max.size of toolshank | 25*25m2 | 25*25m2 | 25*25m2 | ||||
| Longitudinal metric feeds | 42kinds 0.031-1.7mm/rev | 42kinds 0.031-1.7mm/rev | 42kinds 0.031-1.7mm/rev | ||||
| Longitudinal inch feeds | 42kinds 0.0011-0.0633inch/rev | 42kinds 0.0011-0.0633inch/rev | 42kinds 0.0011-0.0633inch/rev | ||||
| Cross metric feeds | 42kinds 0.014-0.784mm/rev | 42kinds 0.014-0.784mm/rev | 42kinds 0.014-0.784mm/rev | ||||
| Cross inch feeds | 42kinds 0.00033-0.01837inch/rev | 42kinds 0.00033-0.01837inch/rev | 42kinds 0.00033-0.01837inch/rev | ||||
| Metric threads range | 41kinds 0.1-14mm | 41kinds 0.1-14mm | 41kinds 0.1-14mm | ||||
| Inch threads range | 60kinds 2-112T.P.I | 60kinds 2-112T.P.I | 60kinds 2-112T.P.I | ||||
| Moudle threads range | 34kinds 0.1-7M.P | 34kinds 0.1-7M.P | 34kinds 0.1-7M.P | ||||
| Diametral threads range | 50kinds 4-112D.P | 50kinds 4-112D.P | 50kinds 4-112D.P | ||||
| TAILSTOCK | Dia.of tailstock sleeve | 60mm | 60mm | 60mm | |||
| Taper of tailstock sleeve | MT4 | MT4 | MT4 | ||||
| Max.travel of tailstock | 130mm | 130mm | 130mm | ||||
| MOTOR | Main drive motor | 5.5KW | 5.5KW | 5.5KW | |||
| Coolant pump motor | 90W | 90W | 90W | ||||
| PACKING | L*W*H(1000mm) | 245*115*175cm | 295*115*175cm | 345*115*175cm | |||
| WEIGHT | N.W/G.W(1000mm) | 1650/1950kgs | 1800/2100kgs | 1950/2300kgs | |||
Configuration Information
